SPONSORS
2024 ICRBE EXPO |
Article from Rodmaker magazine
Posted by:
matthew woods
(---.nas30.houston4.tx.us.da.qwest.net)
Date: July 07, 2005 11:12PM
I would like to have a copy of the article Easy Reel Seat Mounting from Vol 7 #2 Mar/Apr 04. I tried the online Library, but could only get a list of newly added items. If there is an archive available, I would appreciate knowing about it. I will pay mailing costs and copying cost if necessary. If this request causes any copywrite problems, please disregard. Thanks Matt Re: Article from Rodmaker magazine
Posted by:
Phil Richmond
(---.200-68.tampabay.res.rr.com)
Date: July 07, 2005 11:53PM Re: Article from Rodmaker magazine
Posted by:
Anonymous User
(---.b.003.brs.iprimus.net.au)
Date: July 08, 2005 02:02AM
Mathew, if it is reference the flexcoat arbors just go to the flexcoat website gives you a good run down on what you need to know. I have also found the flexcoat company very helpful in providing additional information when asked. Re: Article from Rodmaker magazine
Posted by:
Anonymous User
(Moderator)
Date: July 08, 2005 08:45AM
The issue is for sale on the back issue page. Copying or reproducing articles is illegal and I would do more than just frown on anyone I caught doing that sort of thing.
The article did detail use of the Flex Coat arbors, but what is on the Flex Coat site is not the same as the procedure outlined in the magazine article. ............... Re: Article from Rodmaker magazine
Posted by:
matthew woods
(---.nas30.houston4.tx.us.da.qwest.net)
Date: July 08, 2005 11:10AM
My thanks for the posts of info on this request. The Flex coat site answered some of my questions. To Tom K: I hope you understand that it was not my intention to pirate copyrighted material, the reason for my disclaimer on my post, but not having seen a copy of Rodmaker, I was not aware of your copyright policy. Some trade and hobby magazines allow some copies of some articles. Again thanks for the info and the opporltunity to use your Forum. Re: Article from Rodmaker magazine
Posted by:
Anonymous User
(Moderator)
Date: July 08, 2005 01:04PM
Not a problem. I realized you were not trying to have anyone copy the material.
.................. Sorry, only registered users may post in this forum.
|