I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Fire Safety question: Rags and solvents
Posted by: Phil Richmond (---.200-68.tampabay.res.rr.com)
Date: July 01, 2005 10:25PM

After flocking my third grip in a row tonight, I ended up with blue flocking paint all over my hands because the last one was long and I was hurrying to try to get it done within the time window.

Used a rag and denatured alcohol to get the stuff off- it dries fast and very hard to get off! Don't recommend wearing this stuff.

Then made me realize, what do you do with your alcohol/solvent soaked rags? Don't have a garage, can't really throw it out. Guess you could, but seems like a fire hazard to me. What do you guys that don't have special rag cans do with these things?
Phil



Edited 1 time(s). Last edit at 07/01/2005 10:27PM by Phil Richmond.

Options: ReplyQuote
Re: Fire Safety question: Rags and solvents
Posted by: Anonymous User (Moderator)
Date: July 01, 2005 10:33PM

Don't confine them. These aren't the type solvents to spontaniously combust, but I still wouldn't contain them in a corner, a bag, or wadded up and thrown on the floor inside. Put them safely outside where they can dry and then toss them out. If your city has regulations about disposing that sort of stuff, heed them.

.............

Options: ReplyQuote
Re: Fire Safety question: Rags and solvents
Posted by: Phil Richmond (---.200-68.tampabay.res.rr.com)
Date: July 01, 2005 10:38PM

OK. Thanks. I was letting it dry over the sink, wasn't sure if that was ok or not. Don't mean to seem like a worry wart- wasn't sure if these could combust or not. All I know is I didn't want to end up with a giant alcohol burner in my kitchen.

Will put outside.

Phil

Options: ReplyQuote
Re: Fire Safety question: Rags and solvents
Posted by: Erik Kunz (---.dsl.snfc21.pacbell.net)
Date: July 01, 2005 10:47PM

An oily waste / flammable safety trash can is a good idea.

They are typically red cans made of metal (some are plastic too) with a flip-up top and are designed for solvent or oil-soaked rags.

They aren't really air tight per se, but they are designed to prevent your solvent soaked rags from becoming part of a fire by segregating them from ignition sources and limiting the amount of oxygen around the waste... they're kind of expensive though... Should be emptied every night.

Also... I tend to use coffee filters as my rags for most things (except when I'm cleaning up more of a bulky mess like adhesive from grip installation for example). The coffee filters are thin and don't absorb much solvent... they dry out much more quickly than thick paper towels... and they don't introduce lint or fibers (at least to any considerable degree).

My $0.02...

Erik



Edited 1 time(s). Last edit at 07/01/2005 10:48PM by Erik Kunz.

Options: ReplyQuote
Re: Fire Safety question: Rags and solvents
Posted by: lane cobb (---.ev1.net)
Date: July 02, 2005 09:08PM

I know ozidizers are not as common in this hobby, but do not dry/store/dispose solvent rags and oxidizer rags together. That is just a fire waiting to happen spontaneously.

The thrill is not in the kill

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster