SPONSORS
2024 ICRBE EXPO |
Thin-Walled Brass Tubing
Posted by:
David Spence
(---.ec.res.rr.com)
Date: June 26, 2005 11:29PM
Trying to find a source for this to try the polyester casting described in the last Rodmaker. Any help? Thanks! Re: Thin-Walled Brass Tubing
Posted by:
Anonymous User
(---.hsd1.co.comcast.net)
Date: June 26, 2005 11:40PM
If you can't find it in a local hobby and craft store try www.onlinemetals.com or www.smallparts.com
Mark Re: Thin-Walled Brass Tubing
Posted by:
Joe Emig
(---.253.118.142.Dial1.Cincinnati1.Level3.net)
Date: June 27, 2005 12:05AM
David, Mark is correct a lot of the specialty hobby stores carry it. Especially the ones that lean more toward items like remote controlled airplanes. I have also bought it at the larger Ace Hardware stores. The brand I buy is K & S Engineering out of Chicago. Re: Thin-Walled Brass Tubing
Posted by:
Jesse Buky
(---.exis.net)
Date: June 27, 2005 10:29AM
The brass tubing works very well, I use it on some of my encapsulated grips. The size has to a little oversize as you cannot ream the brass larger like you can the PCV pipe. Jesse Sorry, only registered users may post in this forum.
|