I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rod Case-logo and ingraved?
Posted by: bill boettcher (---.an2.nyc41.da.uu.net)
Date: June 25, 2005 12:17AM

Does any one else do rod cases with engraving and a logo for one case ? REC you need 10 done?
Thanks

Options: ReplyQuote
Re: Rod Case-logo and ingraved?
Posted by: Spencer Phipps (---.hsd1.wa.comcast.net)
Date: June 25, 2005 07:58AM

Bill,
If you want the side of the case silk screened, I don't know. If you just want something put on the cap, jewelry and the trophy/plaque companies can do that. I've had some done that way with good results.

Options: ReplyQuote
Re: Rod Case-logo and ingraved?
Posted by: Anonymous User (Moderator)
Date: June 25, 2005 08:57AM

You can etch it, as shown in the Volume 7 #5 RodMaker, or as Spencer says, take it to your local jewelry or trophy shop for engraving.

..........

Options: ReplyQuote
Re: Rod Case-logo and ingraved?
Posted by: Billy Vivona (---.ny325.east.verizon.net)
Date: June 25, 2005 09:23AM

Give Bob at Custom Tackle Supply a call, he might be able to help.

Options: ReplyQuote
Re: Rod Case-logo and ingraved?
Posted by: bill boettcher (---.an3.nyc41.da.uu.net)
Date: June 25, 2005 11:02AM

REC has some nice looking cases !!?? Then again they are a class act.
Would be nice with a logo on the case



Edited 1 time(s). Last edit at 06/25/2005 11:09AM by bill boettcher.

Options: ReplyQuote
Re: Rod Case-logo and ingraved?
Posted by: bill boettcher (---.an2.nyc41.da.uu.net)
Date: June 26, 2005 01:28PM

Contacked Ron at LandMark Talked to him for about two hours on the phone. Nice guy. Helpful.
Prices are nice also

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster