SPONSORS
2024 ICRBE EXPO |
Best CP to buy?
Posted by:
Phil Richmond
(---.centcom.mil)
Date: June 17, 2005 05:57AM
Need to order some color preserver. I never use it, but getting ready to do a rod with white underwraps. What's the best all round color preserver for a combination of ease of use and color preservation? Re: Best CP to buy?
Posted by:
KEITH BURNETTE
(---.roa.east.verizon.net)
Date: June 17, 2005 06:35AM
In my humble opinion, I would only consider Gudbrod 811. It is the best. Starts out clear and stays that way.
Keith Re: Best CP to buy?
Posted by:
Michael Sledden
(208.21.98.---)
Date: June 17, 2005 07:31AM
I have my best results with Brillance. You have to let this one dry a bit longer, but have never had a problem with it. Re: Best CP to buy?
Posted by:
Greg Hileman
(---.cessna.textron.com)
Date: June 17, 2005 08:49AM
I just switched to 811. You might have to thin it a bit because it sometimes comes thick. But it retains the orginal color of your thread better than anything else I've used. Re: Best CP to buy?
Posted by:
Robert Box
(---.adt.com)
Date: June 17, 2005 10:27AM
811, thinned.
5 parts 811, 1 part alcohol. goes on clear, dries fast.... Re: Best CP to buy?
Posted by:
Phil Richmond
(---.200-68.tampabay.res.rr.com)
Date: June 17, 2005 01:35PM
What type of alcohol? Denatured or the rubbing stuff? Re: Best CP to buy?
Posted by:
Ellis Mendiola
(---.dsl.hstntx.swbell.net)
Date: June 17, 2005 02:05PM
I did a feather inlay last night and used 811 thinned with isopropyl. The inlay was done over thread so I put a coat of 811 first on the thread and then layed the feather on it. The tread looks good so I guess the isopropyl is what I will keep on using. It took me a while to guess at the right mixture. I kept getting a real gummy mess at first. Re: Best CP to buy?
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: June 17, 2005 03:12PM
811 is my choice also
Mike Re: Best CP to buy?
Posted by:
Phil Richmond
(---.200-68.tampabay.res.rr.com)
Date: June 17, 2005 03:34PM
811 ordered. Thanks.
Phil Sorry, only registered users may post in this forum.
|