SPONSORS
2024 ICRBE EXPO |
STuck Ferrule
Posted by:
Shawn Moore
(82.96.100.---)
Date: June 14, 2005 05:24PM
Okay I've forgotten. On a graphite rod with a stuck ferrule, do you apply heat or cold to the area? Re: STuck Ferrule
Posted by:
Tom Doyle
(---.ipt.aol.com)
Date: June 14, 2005 06:18PM
Cold to the male joint, heat to the female joint. Re: STuck Ferrule
Posted by:
Anonymous User
(Moderator)
Date: June 14, 2005 06:53PM
I would probably just add ice to the whole area, or sit it in front of an air conditioner for an hour or so. That usually does the trick.
.......... Re: STuck Ferrule
Posted by:
Jeff Shafer
(---.phil.east.verizon.net)
Date: June 14, 2005 07:13PM
I've clasped a handful of ice around a stuck ferrule on a tip over butt fly rod and within a few minutes was able to disassemble.
Jeff Shafer Re: STuck Ferrule
Posted by:
Joe Kassuba
(---.dhcp.knwk.wa.charter.com)
Date: June 15, 2005 01:36AM
Hello Shawn
Ice it and it should come unstuck. I suggest using U40 Ferrule Lube after it is unstuck. U 40 Ferrule Lube will reduce wear, clean the ferrule, keep it togeather and will come apart when you want it too. It really work very well. Regards Joe Kassuba His Rod Shop Joe Kassuba Sorry, only registered users may post in this forum.
|