I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Anybody got Andy Dear's ph #?
Posted by: Marty Martin (---.gsp.bellsouth.net)
Date: June 08, 2005 02:39PM

The one I tried didn't work.

Options: ReplyQuote
Re: Anybody got Andy Dear's ph #?
Posted by: Bret Rahe (---.ch2m.com)
Date: June 08, 2005 02:51PM

See his recent post......Bret

[www.rodbuilding.org]

Options: ReplyQuote
Re: Anybody got Andy Dear's ph #?
Posted by: Anonymous User (---.r1.scrgwy.infoave.net)
Date: June 08, 2005 02:53PM

that number does not work. I have sent e-mails as well. I guess he is busy...
I need some stuff......anyone have a 1/2" mandrel they want to part with....???
pb

Options: ReplyQuote
Re: Anybody got Andy Dear's ph #?
Posted by: Gerry Rhoades (---.unifield.com)
Date: June 08, 2005 03:29PM

I have a 1/2'" mandrel I got from Andy along with some practice cork. I think the mandrel is shorter than normal so he gave me a good deal on it. I'm sure it's at least 12" though. I doubt I will ever use it again.

Options: ReplyQuote
Re: Anybody got Andy Dear's ph #?
Posted by: Anonymous User (---.r1.scrgwy.infoave.net)
Date: June 08, 2005 03:55PM

Thanks for the offer Gerry......I better hold off for a longer one.
However, if they should suddenly become unavailable.......I'll be giving you a holler.
thanks,pb

Options: ReplyQuote
Re: Anybody got Andy Dear's ph #?
Posted by: Jason Weber (---.houston.res.rr.com)
Date: June 08, 2005 08:40PM

Marty I tried to email you andy's phone numbers but your earthlink blocked me cause I am not "approved" sorry.

Jason

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster