I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Permagloss????
Posted by: Noel Spann (12.39.180.---)
Date: June 01, 2005 05:15PM

If I repaint a blank with Dupli-Color Auto Spray and put a top coat of Permagloss, will the Permagloss eat through the paint?
Thanks in advance,
Noel

Options: ReplyQuote
Re: Permagloss????
Posted by: Erik Kunz (---.vascular.medtronic.com)
Date: June 01, 2005 06:02PM

Try it on a piece of aluminum foil or scrap blank first... that's the only way to know for sure.

Erik

Options: ReplyQuote
Re: Permagloss????
Posted by: Randy Parpart (Putter) (---.propel.com)
Date: June 01, 2005 10:10PM

Let the paint cure for a few days to do this test; then try the Permagloss on it. Maybe even 3 days...

Putter
Williston, ND

Options: ReplyQuote
Re: Permagloss????
Posted by: Jay Lancaster (12.174.138.---)
Date: June 01, 2005 10:15PM

Permagloss is fine on DupliColor. I'm wrapping on one right now. I think it is ok to use on most automotive type paints. If I remember, I waited 24 hours (maybe less) after paint to top coat with Permagloss. No problems.

Jay

Options: ReplyQuote
Re: Permagloss????
Posted by: bill boettcher (---.250.57.31.Dial1.Weehawken1.Level3.net)
Date: June 02, 2005 07:48AM

With permagloss you will have to do it pretty fast. It is kind of hot.
Minwax spar urethane is another and even an auto two part clear

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster