SPONSORS
2024 ICRBE EXPO |
Permagloss????
Posted by:
Noel Spann
(12.39.180.---)
Date: June 01, 2005 05:15PM
If I repaint a blank with Dupli-Color Auto Spray and put a top coat of Permagloss, will the Permagloss eat through the paint?
Thanks in advance, Noel Re: Permagloss????
Posted by:
Erik Kunz
(---.vascular.medtronic.com)
Date: June 01, 2005 06:02PM
Try it on a piece of aluminum foil or scrap blank first... that's the only way to know for sure.
Erik Re: Permagloss????
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: June 01, 2005 10:10PM
Let the paint cure for a few days to do this test; then try the Permagloss on it. Maybe even 3 days... Putter Williston, ND Re: Permagloss????
Posted by:
Jay Lancaster
(12.174.138.---)
Date: June 01, 2005 10:15PM
Permagloss is fine on DupliColor. I'm wrapping on one right now. I think it is ok to use on most automotive type paints. If I remember, I waited 24 hours (maybe less) after paint to top coat with Permagloss. No problems.
Jay Re: Permagloss????
Posted by:
bill boettcher
(---.250.57.31.Dial1.Weehawken1.Level3.net)
Date: June 02, 2005 07:48AM
With permagloss you will have to do it pretty fast. It is kind of hot.
Minwax spar urethane is another and even an auto two part clear Sorry, only registered users may post in this forum.
|