SPONSORS
2024 ICRBE EXPO |
Scratch in blank & decal installations
Posted by:
Mike Getsy
(---.238.133.179.Dial1.Philadelphia1.Level3.ne)
Date: May 23, 2005 08:46PM
Hi guys ,I'm working on my second rod I stripped one of my Tica's & did a rewrap. when I was removing the tape that holds the threads for the cross wrap I was careless with the razor blade & put a scratch in the blank .It is matte finish so looking for any advice one how to conceal it. I also want to put a decal on the closing wrap nearest the handle should I get my flexcoat on the crosswrap done then go back & install the decal or can I install the decal on the 2nd coat & seal it in with the third coat .Do I turn the rod in the dryer when I put the flexcoat over the decal.thats all for now thanks in advance Mike In PA Sorry, only registered users may post in this forum.
|