SPONSORS
2024 ICRBE EXPO |
convesion rate
Posted by:
larry pirrone
(---.los-angeles-03rh15rt.ca.dial-access.att.net)
Date: May 18, 2005 07:27PM
for converting spinning rod to fly or vise versa. 1/8th oz or 1/16th oz per line wt? Re: convesion rate
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: May 18, 2005 08:24PM
Larry,
It's 1/16 oz were ERN at ti's midpoint. ie 1.5 ERN = 1/16 oz. 6.5 = 3/8 oz. Re: convesion rate
Posted by:
Anonymous User
(Moderator)
Date: May 18, 2005 09:27PM
The fly line/rod number is the numerator. 16 is the denominator. It's not perfect, but it's close.
....... Re: convesion rate
Posted by:
Ralph D. Jones
(---.dialup.mindspring.com)
Date: May 19, 2005 01:15PM
It works very well converting fly blanks to crappie spinning rods. I've used this scale since I read about it here several years ago. If at first you don't succeed, go fishing, then try, try again. Sorry, only registered users may post in this forum.
|