I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

seattle area ???
Posted by: john scott (---.evrtwa1.dsl-verizon.net)
Date: May 14, 2005 12:43PM

hi all just wondering if there is any stores in the seattle area that i can go and get all the materials for a nice ul spinning rod like in the 6'6'' i was thinking on the st croix 2s66ulf2 but just dont know of any stores i can get all the stuff at thanks

Options: ReplyQuote
Re: seattle area ???
Posted by: Spencer Phipps (---.lsil.com)
Date: May 14, 2005 01:19PM

Greg's Custom Rods, Lake Stevens.

Options: ReplyQuote
Re: seattle area ???
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: May 14, 2005 06:06PM

I would venture a wild guess that 95% of all rodbuilding components/supplies are purchased either through catalogs or online. Check out the sponsors on the left

Options: ReplyQuote
Re: seattle area ???
Posted by: john scott (---.evrtwa1.dsl-verizon.net)
Date: May 14, 2005 06:19PM

thats for all the help i will do that

Options: ReplyQuote
Re: seattle area ???
Posted by: Bob Balcombe (---.rb2.gh.centurytel.net)
Date: May 14, 2005 06:19PM

Check with Utmost Enterprises in Squim. They are also a sponcer on the left. For the Seattles area directly Gregs is your best bet, also you can give Angler WorkShop a call they are in Woodland. The above mentioned stores are great guys to work with
Good Wraps Bob John I tried emailing you but I got it back saying none deliverable

Options: ReplyQuote
Re: seattle area ???
Posted by: john scott (---.evrtwa1.dsl-verizon.net)
Date: May 14, 2005 07:50PM

thanks bob think i know why the email didnt work try this one steelheader1_6@msn.com i think i will run up to gregs next week.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster