I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Muti-rod dryer
Posted by: Phil Richmond (---.amer.csc.com)
Date: April 29, 2005 08:34PM

What are the options? I see the double Sully's is $99. Pac-Bay came out with a four rod dryer, but I can't find any prices on it or where it is for resale.

Any other's out there or any recommendations?

Phil

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: Jason Weber (---.houston.res.rr.com)
Date: April 29, 2005 08:37PM

Flexcoat makes a four rod dryer. I have one and it works great...kinda pricey though.

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: Phil Richmond (---.amer.csc.com)
Date: April 29, 2005 08:56PM

Yeah, too pricey for me, crossed it off the list real quick. Not looking to spend over $200.

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: John Raymond (---.dsl.tc3net.com)
Date: April 29, 2005 09:10PM

Phil, you can make a drum type dryer, using a barbeque motor or any type motor for that matter. i used a telecoping tent pole, ground a bolt square to fit in it, bolt through the rubber crutch end. cut some circles, glued some 1/2 material on the circles tapped them for thumb screws so i can move them around on the pole. still going strong after 5 years. real cheap to make too. oh. square end of bolt goes in motor. John

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: Anonymous User (---.proxy.aol.com)
Date: April 29, 2005 09:20PM

Go to the place near that sell Gas Grills and BBQ pits. There is a rotisserie attachment for nearly all of them that is a motor, shaft and normally four to six prongs on each end. Wack the shaft in the middle and install PVC extension and holders for as many as you want.

Gon Fishn

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: William Bartlett (---.proxy.aol.com)
Date: April 29, 2005 09:47PM

Tom Kirkman has pictures of his dryer in the picture section under equipment check it out!! Bolts to the ceiling up out of the way, pretty nice set-up.

Bill in WV

Options: ReplyQuote
Re: Muti-rod dryer
Posted by: Neal Cissel (---.phnx.qwest.net)
Date: April 30, 2005 08:57PM

We at Neal's Fishing Products sell the Qaud dryer of Pac Bay's, we don't have any instock right now but if you are wanting to know the price feel free to email us at neal@nealsfishingtackle.com


Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster