SPONSORS
2024 ICRBE EXPO |
SIC TIP - Tube Size 16 - 20 Ring
Posted by:
Mike Riggs
(---.nortelnetworks.com)
Date: April 26, 2005 02:08PM
Hello,
I am re-building a Lamiglas Surf Rod. It currently has Fuji SIC guides to be replaced, but would appear to have a Hardloy Tip. I've researched several distributors web sites and cannot locate a Fuji SIC tip top with a tube size of 16 and a ring size of 20. Can anyone confirm that SIC is available in 16/20 and where I may locate one? Thanks in advance! Re: SIC TIP - Tube Size 16 - 20 Ring
Posted by:
Doug Moore
(---.dfw.dsl-w.verizon.net)
Date: April 26, 2005 02:54PM
Mike, I may be wrong, but I think you are only going to be able to find a 12mm ring with a 16 tube size in a Fuji. That's in a UST.
The PST's go to a 16mm ring but only up to a 14 tube size. Regards......Doug@ TCRds Re: SIC TIP - Tube Size 16 - 20 Ring
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: April 27, 2005 02:34AM
From the last time I checked (Nov.'04), Doug Moore is pretty much correct-a-mundo.
SILICON CARBIDE (FUJI's): BPST-20mm-12/64ths ($12) PST-16mm-14/64ths ($11) UST-12mm-18/64ths ($10) Linda at Summer Moon Rod Works can tell you if the BPST is still available and still in stock. Her hard-copy SMRW Catalog has the BPST on Page 26. Telephone #: (845) 688-2016. E-ddress: summermoon@hvi.net Website: www.summermoonrodworks.com Mike - are you Eric Riggs brother? Didn't he just build on a Lamiglas GSB 136 2MH blank, just before Christmas 2004? ... Eric Riggs Replied to Shawn Taylor back on February 1, 2005, when Shawn had almost the same question as yours in: [www.rodbuilding.org] Re: Size 20 Tip Top Lami 136 1MH? - Posted by: Eric Riggs That should turn up some other ideas, too. Best Wishes, -Cliff Hall, Gainesville,FL- Re: SIC TIP - Tube Size 16 - 20 Ring
Posted by:
eric riggs
(---.nyc.res.rr.com)
Date: April 27, 2005 12:28PM
Wow-What a memmory you got there Cliff!
No, Mike is not my brother......even though we do share the same last name! Mike -like Clif stated, I recently built a Lami GSB1362MH using All Fuji SIC guides. I can't imagine why you would need a ring size so big for the tip? My stick casts weight & bait up to 16oz with nooo problem. Here are the guide #'s I used.....all sic- HNSG's size 20,16,16,12,12,12,12, with a UST12-16 tip $$$$$$ Hope this helps? eric riggs Re: SIC TIP - Tube Size 16 - 20 Ring
Posted by:
Mike Riggs
(---.nortelnetworks.com)
Date: April 27, 2005 01:07PM
Thanks everyone! Still on my quest. So if anyone can add please do so!
Eric, I am re-building with the owner requesting the exact replacment with spacing and sizing. The rod itself was built by Red Drum Tackle, a reputable outfit on the Outer Banks of NC. They used only 5 guides total, being sized 25, 20, 20, 20 and a 20 tip top which by the way is a 20 Hardloy! Exact placement escapes me. The owner is quite pleased with the performance so I dare not challenge. Sorry, only registered users may post in this forum.
|