SPONSORS
2024 ICRBE EXPO |
Tiptop woes
Posted by:
Rich Pedro
(---.hsd1.ca.comcast.net)
Date: April 23, 2005 10:53PM
I am building my 1st flyrod. It's a 5wt forecast blank... The model number is F905*3DB
I have the right size tiptop but she no fit!!! how can I get it to fit??? without damaging the blank? or would ya suggest that I get the next size up??? Thanks Rich Re: Tiptop woes
Posted by:
Thomas F. Thornhill
(---.pdx.or.uspops.net)
Date: April 23, 2005 10:57PM
Rich
Get the next size up. If you try to resize the tip of the the blank you will void the warrenty. Thomas F. Thornhill Re: Tiptop woes
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: April 24, 2005 12:34AM
This is very common; a blank listed as size "X" tip top. These things vary quite a bit in actuallity. Having a sponsor send the correct sized tip top with the blank is the only way to be sure with ordering only one tip top or not stocking a complete set of tip tops in the shop.
As an example, I've built many rods (over 100) from a certain blank listed as 4.0 tip top and have had very few of them actually fit to this size. Most were 4.5 and some were even 5.0. Putter Williston, ND Re: Tiptop woes
Posted by:
eric zamora
(---.246.138.112.Dial1.SanJose1.Level3.net)
Date: April 24, 2005 02:54AM
i've decided to begin the practice of ordering extra tip tops, one over and one under the "suggested" size. i've also decided to order 2-3 stripper guides too, with each order, in the thought of slowly builing up a stock of "extra" pieces. doesn't help you now, but for the future.. this is your first fly rod? not your first rod though i see... there will be more! :-)
eric fresno, ca. Re: Tiptop woes
Posted by:
sanford hochman
(---.hsd1.ma.comcast.net)
Date: April 24, 2005 12:12PM
One thing to remember about tip tops. If the shop you order the top from tries it on the same blank which has no finish ( ex: matte finish), then the tip top will be 1/2 to one size smaller. It must be fitted to the same rod blank with the same finish.
Sanford Re: Tiptop woes
Posted by:
Anonymous User
(---.hsd1.co.comcast.net)
Date: April 24, 2005 11:54PM
When I order from Hook and Hackle Bob always sizes the tip top to the blank. He also staples the tip top bag to the blank bag. There have been a few blanks that I've ordered that Bob ended up sending a different sized tip top than I ordered because it was the right one for the blank.
Mark Sorry, only registered users may post in this forum.
|