SPONSORS
2024 ICRBE EXPO |
Wrap colour help
Posted by:
Anonymous User
(---.airservices.gov.au)
Date: April 23, 2005 04:48AM
G'day Guys,
Could anyone suggest a thread colour that would suit the RV6 Clear gloss Rainshadow blank fitted with the PacBay camo grips so probably a green would be a good start, any suggestion on which green and should I inlay or trim these wraps, I now see why the camo grips create such head aches. Edited 1 time(s). Last edit at 04/23/2005 06:20AM by Myles Boon. Re: Wrap colour help
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: April 23, 2005 09:29AM
Myles,
Do a camo marble job on the butt and guide wraps! Incidently, a cut down 10/12 gauge shotgun shell (spent) fits the butt and looks sharp as a butt cap!! Just take an inch or so off. I left the wnchestor logo on, buffed up thr brass and put a coat of LS on the whole shell. Looked pretty cool!! Mike Edited 1 time(s). Last edit at 04/23/2005 09:30AM by Mike Barkley. Re: Wrap colour help
Posted by:
Jim Rippe
(---.252.201.149.Dial1.Chicago1.Level3.net)
Date: April 23, 2005 11:24AM
Hi Myles. I marbled my guide wraps and butt wrap in camo.
[www.rodbuilding.org] [www.rodbuilding.org] Re: Wrap colour help
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: April 24, 2005 01:12AM
I'd do the main color as green or black with trims of the other and a tan or beige; gold could be used in place of the tan or beige especially if guides and reel seat hoods are also gold. Putter Williston, ND Sorry, only registered users may post in this forum.
|