SPONSORS
2024 ICRBE EXPO |
what feathers to use
Posted by:
Michael Sledden
(208.21.98.---)
Date: April 20, 2005 12:40PM
I am looking to do a feather inlay on the split portion of the rear handle on a rod. The thread colors are black, white, greys and silver metalic. Was wondering what would be a good feather/s to use that would match these colors. Right now allI have is a pheasant skin but would like to use something else. Re: what feathers to use
Posted by:
Robert Box
(---.adt.com)
Date: April 20, 2005 12:58PM
Guinea plumeage tip sections (dark gray w/ white spots) as a base layer, with an overlay of a Jungle cock nail would fit your color combo.
Siskyou Aviary is a sponsor to the left. RB Re: what feathers to use
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: April 20, 2005 01:11PM
Grizzly hackle would also look good. Re: what feathers to use
Posted by:
Terry Henson
(---.arcdca.adelphia.net)
Date: April 21, 2005 01:49AM
I would use a Vulturine G with a Grey Jungle fowl secondary feather as a base. A nice Kingfisher enlay with a jungle cock nail would complete a nice enlay
Just a thought and good lick... want to see a pic when you are done.. Re: what feathers to use
Posted by:
Michael Sledden
(208.21.98.---)
Date: April 21, 2005 07:08AM
Thanks for the suggestions. Will be looking into the possibilities I have. Sorry, only registered users may post in this forum.
|