I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

tiny tip-tops
Posted by: Rich Handrick (---.dot.state.wi.us)
Date: April 13, 2005 10:53AM

I'm looking for a source of little rod tips - about a size 2.5 or so. I know Jann's Netcraft has size 2.0 microlite tops, but they are not quite what I'm looking for. The smalllest fly rod tops I can find are a 3.5. I like to build custom ice fishing rods, and most of the solid carbon graphite ice blanks have small tips - 2-2.5-3.0, etc. Does anybody have a source or any ideas for me? Thanks!!!

Options: ReplyQuote
Re: tiny tip-tops
Posted by: Anonymous User (Moderator)
Date: April 13, 2005 10:57AM

Only idea I can give you is to substitue a single foot guide wrapped onto the tip top. Use a Forhan locking wrap and you may find that you like it better than a regular tube type tip top. But, these can be a bear to wrap until you get the hang of it.

.........

Options: ReplyQuote
Re: tiny tip-tops
Posted by: Bruce Wetzel (---.nmci.navy.mil)
Date: April 13, 2005 11:23AM

Rich, have you considered wrapping the tip of the blank with thread before putting on the tip top.

Options: ReplyQuote
Re: tiny tip-tops
Posted by: Rich Handrick (---.dot.state.wi.us)
Date: April 13, 2005 03:18PM

thanks Tom and Bruce - both good suggestions, I will have to try both and see which I prefer. Tom, do you have an online source to show how to do a Forhan locking wrap?

Options: ReplyQuote
Re: tiny tip-tops
Posted by: Anonymous User (Moderator)
Date: April 13, 2005 05:04PM

Yes, right here on this site. Just go to the library page and open the article on the wrap. It's in the line of black buttons above the message board.

........

Options: ReplyQuote
Re: tiny tip-tops
Posted by: Ed Michura (---.kcnet.org)
Date: April 15, 2005 03:29PM

Spare yourself all the trouble ....Merrick Tackle has 2.5 ice rod tops in 3 and 6 ring sizes, cheap.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster