I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Putters Fault
Posted by: Fred Yarmolowicz (---.brick101.nj.comcast.net)
Date: April 05, 2005 08:56PM

Putter reciently sent me a pen that he marblized (thank You for the pen and the idea to practice on them).The last weekend was rainy here in the Northeast so experiment I did.Again thanks to the master.Comments welcome about the finish not the item!!(good or bad).[www.rodbuilding.org]

Freddwhy (Rapt-Ryte)



Edited 1 time(s). Last edit at 04/05/2005 08:58PM by Fred Yarmolowicz.

Options: ReplyQuote
Re: Putters Fault
Posted by: James(Doc) Labanowski (---.proxy.aol.com)
Date: April 05, 2005 09:06PM

Just got a report on the TV that there is an all points out on Putter alias Putski alias E______(oops) Warrent says something about marblizing the Statue of Liberty. He has gone too far now, and it is rumored there are several accomplices. I am really glad I am to stupid to marble, other than lousing them.

Options: ReplyQuote
Re: Putters Fault
Posted by: Gerry Rhoades (---.vnet-inc.com)
Date: April 05, 2005 09:23PM

Is that a cell phone?? Very cool idea and it looks good. How did you rotate it?

Options: ReplyQuote
Re: Putters Fault
Posted by: William Bartlett (---.proxy.aol.com)
Date: April 05, 2005 09:34PM

AHH, Putter!!!! Now whadja go and do that fer??? I knew she needed a coat of paint but....sheesh!!!!

Bill in WV

Options: ReplyQuote
Re: Putters Fault
Posted by: Fred Yarmolowicz (---.brick101.nj.comcast.net)
Date: April 05, 2005 09:37PM

I have a drier that has 4 wooded pegs with balls on the end to attach rubber band to.I took the phone cover off and was able to flex the pegs enough to allow me to get the cover over them.

Freddwhy (Rapt-Ryte)

Options: ReplyQuote
Re: Putters Fault
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: April 05, 2005 10:44PM

Looks great, Fred. Glad you liked the pen. Thanks again for all of the tints to try; that was thoughtful of you to let me experiment with them. I see you're using them, too ;) But don't blame me for yer darned addiction, blame that pesky Charles "Jason" Brown! It's all his fault!

He was the one who so patrioticly had to give our fair lady the red white and blue topcoat; he's the one who should be in irons-honest, occifer errr, officer, hiccc. I was only helping!

Putter
Williston, ND

Options: ReplyQuote
Re: Putters Fault
Posted by: William Bartlett (---.proxy.aol.com)
Date: April 06, 2005 12:04AM

A likely story!!!!!! LOL

Bill in WV

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster