I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

PIGMENT material, surprise
Posted by: David von Doehren (---.proxy.aol.com)
Date: March 29, 2005 07:34PM

I'm in costruction , so using a caulk line often, and need refill. I keep a couple plastic bottles around, not expensive.
It mixes well, with epoxy, goes on smooth, applies and stays a very even color. So far only RED & BLUE, might be other colors out there somewhere

Dave von Doehren
PRRODS......If man built it , man can fix it.and if man built it man can break it !

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: March 29, 2005 09:55PM

The blue chalk in mine is kinda flat in color; how does it look in the marble? Haven't ever seen it in red...

Putter
Williston, ND

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Kirk Miller (---.gci.net)
Date: March 29, 2005 10:20PM

Hmmm..........Pretty sure there is yellow chalk too.......that should mean that purple, green, and orange are available with a little mixing


Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: March 29, 2005 10:59PM

Kirk, I can hear the gears spinnin' from way up here in the frozen tundra; settle down, big fella!!

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Jim Rippe (---.158.183.50.Dial1.Chicago1.Level3.net)
Date: March 29, 2005 11:22PM

No need to mix for orange. I had it before in my chalk lines!

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Gerry Rhoades (---.vnet-inc.com)
Date: March 30, 2005 12:44AM

What about clumping? I know that can be a problem mixing powder into epoxy.

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Kirk Miller (---.gci.net)
Date: March 31, 2005 03:22AM

Frozen Tundra?........Where are you at Putter?

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: March 31, 2005 01:02PM

North Dakota; right by Montana and Saskatchewan.

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Kirk Miller (---.gci.net)
Date: March 31, 2005 01:16PM

Yikes that sounds like frozen tundra to me.....lol Alaska here, the frozen tundra comment made me wonder if you were somewhere in Alaska. I am originally from Montana and idaho though, and just applied for a job in Billings so I may be back that way someday.

Options: ReplyQuote
Re: PIGMENT material, surprise
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: March 31, 2005 02:51PM

I'm from Montana originally, too. Gerry Rhoades is in Billings; good friend, fellow rod builder...

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster