SPONSORS
2024 ICRBE EXPO |
Ball Bearing Wheels?
Posted by:
Dale Richardson
(139.72.158.---)
Date: March 29, 2005 09:25AM
I'm planning an upgrage to my lathe and am trying to find those little ball bearing wheels I see on the high dollar rod wrapping machines. I know I've seen people talking about them on the website but can't seem to find anything using the search function. Can anyone give me a source for these? Also I'd like to pick up a couple of 16 rpm motors as well. Thanks in advance for the help. Re: Ball Bearing Wheels?
Posted by:
David von Doehren
(---.proxy.aol.com)
Date: March 29, 2005 09:48AM
Dale
Have you checked with the SPONSORS that are listed on the left side of the web page? Dave Re: Ball Bearing Wheels?
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: March 29, 2005 10:06AM
Fishsticks4U has motors that are close to 16 rpm for around $6. They also have parts for the Forecast wrapping machine and might have the wheels you want. Re: Ball Bearing Wheels?
Posted by:
Ken Driedger
(---.bchsia.telus.net)
Date: March 29, 2005 12:30PM
If you are adventerous, and have an airport with small plane repair facilities on the tarmac, ask about "timed out" phenolic control pulleys. they have a groove for the cable, and a ball bearing heart.
slap on an 0-ring, and Bob's yer uncle. I get 10 of them here for a brown bag wrinkled on the top with a bottle of amber liquid inside...I think it was Johnny Walker, or maybe even Jack someone or other....... Re: Ball Bearing Wheels?
Posted by:
Anonymous User
(---.san.res.rr.com)
Date: March 29, 2005 01:01PM
I saw this posted here a while back - If this link only takes you to their homepage, once there search for "idler pulley with bearings"
[www.herbach.com] - same as above - just add the o-ring Edited 1 time(s). Last edit at 03/29/2005 02:04PM by Jerry Griffin. Re: Ball Bearing Wheels?
Posted by:
Dale Richardson
(139.72.158.---)
Date: March 29, 2005 02:44PM
Thanks for the help guys. Following your suggestions, I found everything I needed.
Dale Re: Ball Bearing Wheels?
Posted by:
Jay Dubay
(---.try.wideopenwest.com)
Date: March 29, 2005 04:09PM
[www.fishsticks4u.com] Has the wheels with rubber o-rings part # wrap11 Re: Ball Bearing Wheels?
Posted by:
Ellis Mendiola
(---.dsl.hstntx.swbell.net)
Date: March 29, 2005 10:45PM
Thanks Jerry. At Herbach's I found a small motor to build a dryer for my flies for less that $10. Sorry, only registered users may post in this forum.
|