Anyone have them, or know where I can find them?

Thanks

There are some out here, but you'll get the best performance from doing a static distribution test. Easy to do, and it's explained very well in an article in the library link above. The St Croix site has a section with spacing charts if you still want to go that way.
Good luck with the project.

Tim,

I have such a spacing I use on my FT blanks!

Dan

Dan,

Are you able to supply me with the spacings?

Thanks,

Tim

Hi Tim! Just got back in from the weekend and saw your request--the 11th guide was supplied as a taming guide, to be placed 4" to 4-1/2" ahead (toward the tip) of the stripping guide AFTER the static distribution test is done (see the article in the "Library" here). I think you'll find a dramatic improvement in casting, especially shooting, using this set up. Do a search under "taming guide" here or see Tom K.'s book for more compelling argument on their use. At G&L, we tested every model we build with and without a taming guide and realized an increase in shooting distance 100%(!) of the time.

I could not more strongly recommend you take the few minutes it takes to do a static deflection/stress distribution test to determine the guide spacing, especially with such high-performance blanks. Feel free to email or call me if you have any questions!

Warmly,

Tim,

Check your e-mail. Look down the list it is marked.

Dan

Tim,

Sorry! I didn't realize your e-mail was hidden. E-mail me and I will send the spacing chart.

Dan