SPONSORS
2024 ICRBE EXPO |
$25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Jay Dubay
(---.try.wideopenwest.com)
Date: March 27, 2005 01:54AM
This offer is for the standerd,Jet or Jet VS lathe's. Use the Promo code TH25JANFEBV5 it's on this site [www.powertoolscenter.net] I just ordered the standard Jet Mini $224.99 shipped, Now will I need a chuck to use Andy's mandrels? Thanks! Jay Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: March 27, 2005 02:48AM
Congrats!! Another addiction! You'll need a 3 or 4 jaw self centering chuck and a drill chuch. Get Andy's CD, it's GREAT!!
Mike Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
bill boettcher
(---.250.168.102.Dial1.Weehawken1.Level3.net)
Date: March 27, 2005 07:15AM
Where is a good place to look for the chuck Mike?
Thanks Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: March 27, 2005 08:01AM Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Chris Marriott
(---.pitt.east.verizon.net)
Date: March 27, 2005 08:02AM
Bill. This place seems to have a decent selection & prices.[www.woodcraft.com]
Also this nova from Amazon [www.amazon.com] Maybe Andy would have some ideas. My Jet-mini is on the way but I'm still looking for a decent chuck at a good price. I hate to spend as much for the chuck as I did the lathe. Chris Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
bill boettcher
(---.250.168.102.Dial1.Weehawken1.Level3.net)
Date: March 27, 2005 08:14AM
Maybe I can customize the one I got from mudhole??? Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: March 27, 2005 08:15AM
I really don't want to post this, as it will take my backorder longer to get here: [www.pennstateind.com] Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
bill boettcher
(---.250.168.102.Dial1.Weehawken1.Level3.net)
Date: March 27, 2005 08:30AM
Nice price. I see what you mean Billy Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Bryan Thompson
(---.client.comcast.net)
Date: March 27, 2005 09:20AM
The bad thing about LCM18 is 3/4" is the smallest diameter it will hold. That @#$%& for your smaller (almost all) mandrels. It does look like a good chuck for wood though although you can never tell looking at them I'd rather play with them and get to know them on a more 1on 1 basis. Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
bill boettcher
(---.250.168.102.Dial1.Weehawken1.Level3.net)
Date: March 27, 2005 09:24AM
Pac bays new upgraded chuck looks pretty nice. Check it out on the site under new Products Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: March 27, 2005 10:16AM
Bryan - gotta do a better job reading descriptions.
" Holds work from 3/4" to 2-1/2" inside, and up to 1-1/4" outside." UP TO 1 1/4 OUTSIDE. That means from 0 to 1 1/4, no? I've got PSI's 3 Jaw economy chuck as well, another fine choice. So fine, it's the same one as on teh Clemens Lathe, and I asume the Renzetti: [www.pennstateind.com] Problem I had with this is it doesn't hold 1 1/4" Cork rings, so I ha teh jaws machined to open up to 1 1/2. I've abused the jaws with steel mandrels (Jaws are aluminum), and they aren't 100% on center any more. Re: $25 off Jet Lathe's standard or VS Free Shipping
Posted by:
Jay Dubay
(---.try.wideopenwest.com)
Date: March 27, 2005 12:24PM
Thanks! Billy that will do the trick and keep some change in my pocket. Jay Sorry, only registered users may post in this forum.
|