I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Titanium spinning reels seat.
Posted by: George Roth (208.186.114.---)
Date: March 17, 2005 02:11PM

I have a client that fishes for salmon and he is wanting a titanium reel seat to place on a 9' Sage spinning rod. I'd ordered a Struble U-21 titanium which fit onto the blank, but it won't accept the larger feet of a spinning reel. The reel he is using is a Dawai Force 3000. I have inquired at Struble and REC, and they don't have such a reel seat. Do any of you have any suggestions as to where I could look for a titanium spinning reel seat? The i.d. needs to be just over .600 to fit the blank. I thank you for your help.

Best regards........George

Options: ReplyQuote
Re: Titanium spinning reels seat.
Posted by: Joe Boomgaard (---.client.comcast.net)
Date: March 18, 2005 08:54AM

You might want to check out the TiCh and woven graphite seats from Cabelas, although I'm not so sure that the ID is big enough. I've had very good luck putting them on the steelhead and salmon rods I've built. They hold up well, too.

[cabelas.com]

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster