SPONSORS
2024 ICRBE EXPO |
Removing 2 part Flex Coat
Posted by:
Jamie Knox
(---.univde01.de.comcast.net)
Date: March 14, 2005 05:45PM
I had to remove a few guides. What is the best way to remove 2 part Flex Coat?
Jamie Re: Removing 2 part Flex Coat
Posted by:
Anonymous User
(Moderator)
Date: March 14, 2005 07:22PM
Gently heat it with a hair dryer or similar and scrape with a thumb nail or plastic butter knife. Go slowly and carefully to avoid nicking any paint that won't be covered by new thread wraps.
.......... Re: Removing 2 part Flex Coat
Posted by:
Jamie Knox
(---.univde01.de.comcast.net)
Date: March 15, 2005 10:00PM
The hair dryer worked great. I heated the area and scraped with a wooden popsicle stick...the knife kept melting. When I had it fairly smooth, I used Goof-Off and it took the rest right off. A little car wax and it looks like the guides were never there! Great stuff...
Thanks for your help! Sorry, only registered users may post in this forum.
|