SPONSORS
2024 ICRBE EXPO |
Learning Help
Posted by:
George Henson
(---.ipt.aol.com)
Date: March 02, 2005 08:05PM
Does anyone know if any one in the Memphis, Tn. area that has rod building classes. I can learn with books and videos but I would really prefer some hands on instruction.
Thanks Re: Learning Help
Posted by:
John Dow
(204.60.177.---)
Date: March 02, 2005 08:18PM
Click the directory button on the top of the page . Good luck . JD Re: Learning Help
Posted by:
Tom Doyle
(---.ipt.aol.com)
Date: March 02, 2005 08:19PM
Classes can be hard to find (though not impossible). Much easier to find would be a rodbuilder in your area who might be happy to give you some one-on-one instruction; most rodbuilders are good about passing things on. Click on the Directory above and plug in TN. (I did that, there were a good handful listed in your state, none specifically in Memphis, but there surely are some there, and the ones listed for TN might know of them.) Re: Learning Help
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: March 03, 2005 09:21AM
Chris Catignani (KatDawg) is in Nashville, he may be able to do this for you...
Putter Sorry, only registered users may post in this forum.
|