SPONSORS
2024 ICRBE EXPO |
Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Greg Vogel
(---.dialup.iowatelecom.net)
Date: February 26, 2005 11:08AM
Hello all,
I am looking for a couple of discontinued G.Loomis blanks. They were a 12’ 4-8 lb. rated Steelhead type blank. I have a fellow out here in Iowa that is looking for them to use for trolling spinner rigs for walleye. As far as I can find Loomis does not have any more. If anyone has one or two or knows where I can find them, or have ideas for something that would be comparable, it would be a good thing for both he and I. He is a “Loomis guy†so other brands might not go over with him but I am open to anything. Thanks in advance, Greg Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Dick Murchison
(204.60.102.---)
Date: February 26, 2005 11:37AM
If you find some, let me in on the secret. I need to build centerpin rods (float rods for steelhead) for use in upper New York State on Lake Ontario, and I can't seem to find any. I need rods 11'6'' and 13'. G Loomis or St. Croix. I would think we are looking for the same, so if I find any, I will let you know. Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
bill boettcher
(---.250.195.216.Dial1.Weehawken1.Level3.net)
Date: February 26, 2005 11:45AM
Try Richards Rod and Reel. He sells St Croix. Specials, over stocked?? Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Dick Murchison
(204.60.102.---)
Date: February 26, 2005 07:39PM
Thanks Bill, I will try him,
Dick Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Emory Harry
(---.client.comcast.net)
Date: February 26, 2005 08:39PM
Greg,
Rainshadow makes two 12' Steelhead blanks in their RX7 graphite (43 million modulus) that are rated at 4 to 8 lb, and 4 to 10 lb. I have not used these particular blanks but I have built up many of the other Rainshadow Steelhead blanks and have been very pleased with all of them. In fact, much more satisfied with them than with the recent Loomis blanks. Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Tom Cooney
(---.proxy.aol.com)
Date: February 26, 2005 09:18PM
Rainshadow IST1384F is as close to the old Loomis GN1164 as you will Find. Re: Looking for discontinued 12' G.Loomis Steelhead blanks
Posted by:
Sam Salmon
(---.bchsia.telus.net)
Date: February 26, 2005 10:49PM
Have a look @ [www.frontierrods.ca] they are produced by Loomis Canada Sorry, only registered users may post in this forum.
|