SPONSORS
2024 ICRBE EXPO |
Queston for members of the 1wt club...
Posted by:
Robert Box
(---.adt.com)
Date: February 25, 2005 11:37AM
I planned to use one of REC's smallest and lightest slide band seat on my Sig. III 1wt, but after weighing it in at a whopping 0.57oz, i'm not going to use it.
The completed rod would weigh near 1.5 oz. With cork grip, recoil guides, thread, etc., i'm wondering what you all used to keep the weight down in the neighborhood of 1oz? I dont want to use an EVA foregrip. I'm thinking I should build an all cork seat with 2 sliding bands.... What sponsors sell slide band ring sets, or all cork seats with slide bands. I'm willing to pay for quality here.... Thanks everyone! RB Re: Queston for members of the 1wt club...
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: February 25, 2005 11:45AM
I think Jann's Netcraft has the cork slide band reel seats. Re: Queston for members of the 1wt club...
Posted by:
Gregory Hileman
(---.cessna.textron.com)
Date: February 25, 2005 11:56AM
I see 2 possible options. Jann's has both the cork handles and either aluminum or graphite sliding rings to go with it. The other option would be to get a cork insert and a #16 skeleton seat. Also at Jann's, but I'm sure other sponsors carry them. I'm not sure which would be lighter. Re: Queston for members of the 1wt club...
Posted by:
Anonymous User
(---.cg.shawcable.net)
Date: February 25, 2005 01:50PM
Hi Robert--we have REC's PLRN seat in stock because of it's popularity to go with the Dan Craft Sig III 1wts. It's an all-cork seat with nicely done lightweight silver slide rings and a very fine (read: light) silver butt cap. You'll find a picture of it on our online store under reel seats...REC...Nickel Silver (it's on the second page of seats). I believe the seats we have in stock all incorporate REC's signature rope knurling, but they are also available with straight or diagonal knurling.
There are other options, to be sure, but this is the nicest of the ultra-light's that we've found! :) Warmly, Re: Queston for members of the 1wt club...
Posted by:
John Dow
(---.snet.net)
Date: February 25, 2005 05:02PM
Robert , I have used the seat that Mr Launstein is teling you about on a 2 wt , and it is very light . The finished 2 wt was 1.69 oz on an IM6 blank , using that seat , and Recoils . I used the PLRW for the looks on my rod , and a couple of burl rings in the cork so the extra weight wasn't an issue .The REC hardware is outstanding , pretty and functional on both of those seats . I realy don't think you will be able to tell the difference from one to the other with the rod strung with line . Just my thoughts...............still haven't fished with my rod yet . ( ,':>( ) Have fun , John Got Fish ? Re: Queston for members of the 1wt club...
Posted by:
bill boettcher
(---.250.195.216.Dial1.Weehawken1.Level3.net)
Date: February 26, 2005 12:29PM
have not built one yet, but have read posts where some people do not like the recoils?? i would think the single foot wire would work Sorry, only registered users may post in this forum.
|