SPONSORS
2024 ICRBE EXPO |
2-pc Spirol?
Posted by:
Stan Hansen
(---.proxy.aol.com)
Date: February 24, 2005 09:06PM
I have done a one pc blank using a spirol guide set up. My Q? is will it also work on
a 2- pc blank? It seems it might be a little harnd to match Thanks for your help Stan Re: 2-pc Spirol?
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: February 24, 2005 09:38PM
Stan,
It will work just fine. Hank On The Rocks Fishing Wells, ME. Re: 2-pc Spirol?
Posted by:
Michael Sledden
(208.21.98.---)
Date: February 25, 2005 07:42AM
No problems at all, it will work just fine as Hank says. Depending on the length of the rod, you may or may not get all the transition guides on the butt section of the rod. For the couple I have done, I was able to get them all on the butt section and the tip section we all guides on the bottom of the blank. Re: 2-pc Spirol?
Posted by:
bill boettcher
(---.250.39.68.Dial1.Weehawken1.Level3.net)
Date: February 25, 2005 07:48AM
Fine, but what if there are some transition guides on the tip section? Will the tip top and running guides keep it from turning? Re: 2-pc Spirol?
Posted by:
Clyde Roberts
(---.ec.rr.com)
Date: February 25, 2005 08:00AM
It won't turn, no worry. I've done big surf rods with only the stripper guide on the butt section. Re: 2-pc Spirol?
Posted by:
bill boettcher
(---.250.39.68.Dial1.Weehawken1.Level3.net)
Date: February 25, 2005 08:06AM
Thanks Clyde. Have not done one but that is good to know. Now I can relax Sorry, only registered users may post in this forum.
|