SPONSORS
2024 ICRBE EXPO |
Sanded finish last night
Posted by:
Bruce A. Tomaselli
(---.dioceseaj.org)
Date: February 24, 2005 08:19AM
To all interested:
I sanded the blemishes with 400 grit paper last night and I feel much better. There are some minor transparents marks but I think the next coat of epoxy will eliminate them. Do you think I should put 2 more thin coats on or just 1 more? Thanks Re: Sanded finish last night
Posted by:
Ed Carr
(---.stkn.dial.netzero.com)
Date: February 24, 2005 11:15AM
Put one lite coat on and see what it looks like if need another add another after first is dry. ED.. Re: Sanded finish last night
Posted by:
Mick McComesky
(---.nas3.saint-louis1.mo.us.da.qwest.net)
Date: February 24, 2005 11:13PM
One thin job should do the trick Bruce. All you are doing at this point is cosmetic. The times when I have to sand down, I usually just wet my finger and run it over the area. If it looks good, I'll put on a layer of permagloss. If it looks at all lumpy, I'll put on a thin coat of low build. Sorry, only registered users may post in this forum.
|