SPONSORS
2024 ICRBE EXPO |
fish wrap
Posted by:
Dan Colville
(---.buf.adelphia.net)
Date: February 21, 2005 05:04PM
HEy guys. Can any one tell me a site that has a pretty good detailed explanation of how to do a fish. It is hard for me to learn a wrap by reading. Mabey someone can email me how to do it. Thanks you so much.
Sincerely, Dan Colville Re: fish wrap
Posted by:
Anonymous User
(Moderator)
Date: February 21, 2005 05:36PM
Complete instructions were in the Volume 5 #1 issue of RodMaker.
1. Form eye and thread with simple diamond. 2. Body is formed by adding chevron to the right of diamond. Wrap up light threads and down dark threads. 3. Begin tail by wrapping another diamond to the right of the body. Square tail wrap dark threads to left and light to right. For a forked tail wrap "plus one" to the right with your light thread. 4. Adds fins by wrapping a quick chevron next to the original diamond. Wrap up to the left, up and down with dark threads. If you want tapered fins, then wrap these at the same time the tail is wrapped. Wrap fins, tail and background "plus one." The article had the step by step illustration to show these steps in better detail. .......... Re: fish wrap
Posted by:
John Dow
(204.60.210.---)
Date: February 21, 2005 06:35PM
Dan , if you go to the link for Visualwrap on the left , you can find it in the pattern link . Very detailed and sep by step instructions with photos. I used it fir my first one . JD Got Fish ? Re: fish wrap
Posted by:
Dave Boyle
(---.dsl.nsw.optusnet.com.au)
Date: February 22, 2005 04:41AM
Try these:
[www.leapinbass.com] Go to the link marked 'Cross Wrapping' [www.visualwrap.com] Follow the thread the find the link to the animated movie file [www.visualwrap.com] This is the link John referred to Regards Dave Boyle www.visualwrap.com Sorry, only registered users may post in this forum.
|