SPONSORS
2024 ICRBE EXPO |
Titebond III
Posted by:
Doug Moore
(---.dfw.dsl-w.verizon.net)
Date: February 21, 2005 11:46AM
Moring all. I've been reading about using Titebond III for glueing up cork rings and have decided to give it a try. My question concerns eva inlays. Is it ok to glue up with Titebond using inlays, or is it better to use epoxy adhesive when doing inlays?
Thanks! Regards......Doug@ TCRds Re: Titebond III
Posted by:
Lynn Huffman
(24.199.174.---)
Date: February 21, 2005 01:07PM
Doug,
I think that most use contact cement for the EVA inlays. It stays flexible so you don't feel hardened glue lines in the grip. Re: Titebond III
Posted by:
Anonymous User
(Moderator)
Date: February 21, 2005 02:31PM
Contact cement for EVA to EVA, for EVA to cork, I'd use epoxy.
........ Re: Titebond III
Posted by:
Doug Moore
(---.dfw.dsl-w.verizon.net)
Date: February 21, 2005 03:09PM
Thanks guys! Regards......Doug@ TCRds Sorry, only registered users may post in this forum.
|