SPONSORS
2024 ICRBE EXPO |
30 RPM dryer
Posted by:
Jim Wilson
(---.dsl.lsan03.pacbell.net)
Date: February 03, 2005 07:33PM
Too cold in my garage to dry at times, do not want to move the extra wrapper inside . Have a 30 Rpm motor that I can use . Would that be too fast for a good finish?
Jim Wilson Re: 30 RPM dryer
Posted by:
Anonymous User
(Moderator)
Date: February 03, 2005 08:01PM
Not necessarily, but depending on how cold it is in your garage, the finishing speed will be the least of your problems.
Or, are you asking if you can finish inside with the 30 RPM motor? That should be fine. .......... Re: 30 RPM dryer
Posted by:
Mick McComesky
(---.nas3.saint-louis1.mo.us.da.qwest.net)
Date: February 03, 2005 08:07PM
Jim, I use a 30 rpm motor for my finishing/drying with no problems. Re: 30 RPM dryer
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: February 03, 2005 08:19PM
I've got blanks turning on 2 30 rpm dryers now. Never had a problem (so far)
Mike Re: 30 RPM dryer
Posted by:
bill boettcher
(---.248.70.150.Dial1.Weehawken1.Level3.net)
Date: February 04, 2005 08:25AM
maybe set up some sort of heater?? heat lamps? Just don't boil the finish Sorry, only registered users may post in this forum.
|