SPONSORS
2024 ICRBE EXPO |
Rod finishes
Posted by:
Sean Vincent
(---.242.204.47.Dial1.Seattle1.Level3.net)
Date: January 31, 2005 01:45PM
What is the best rod finish to use that is crystal clear? Re: Rod finishes
Posted by:
Don Davis
(199.173.226.---)
Date: January 31, 2005 02:46PM
If you mean free of micro bubbles, that would probably be Klass Kote epoxy paint. Other epoxies are thicker with more suspended solids and free bubbles less easily. I have some satin catalyst on order and am thinking that it will refract less light than the gloss, making it "clearer" yet. The bamboo guys use thinned varnishes and oils, but I think the K-K would give them a run for the money. Glass Coat
Posted by:
Rich Garbowski
(---.tbaytel.net)
Date: January 31, 2005 03:51PM
Once I discovered Glass Coat, that is the best one. It's a two part epoxy professional grade finish.
If you want a low build finish, go with LS Supreme. [www.rodreel.com] Rich Garbowski Richard's Rod & Reel email: info@rodreel.com Re: Glass Coat
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: January 31, 2005 05:22PM
I don't think any will bear LS Supreme High or Low Build. Outstanding clarity
Mike Sorry, only registered users may post in this forum.
|