I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Building a rod dryer
Posted by: Anonymous User (---.dioceseaj.org)
Date: January 31, 2005 11:34AM

Forgive me, but I was searching the site for plans for building a rod dryer and haven't found any. Can someone direct to that place. Thanks

Options: ReplyQuote
Re: Building a rod dryer
Posted by: David Banaka (67.171.129.---)
Date: January 31, 2005 04:35PM

I do not know of a site but I have built several 5' wrapper dryers cobos out of wood for people here locally. E-mail me if you are interested in the palnse and I will send you a picture of the wrapper/dryer. I have also found an excellent place to purchase the drying motor for under $9.00

Tight lines

David Banaka

Options: ReplyQuote
Re: Building a rod dryer
Posted by: Gerry Rhoades (---.unifield.com)
Date: January 31, 2005 05:53PM

David,
Your email is hidden. I want to know you source for motors so I can build a second dryer.

Thanks,
Gerry

Options: ReplyQuote
Re: Building a rod dryer
Posted by: Jon Jenkins (Elrod) (---.244.183.188.Dial1.StLouis1.Level3.net)
Date: January 31, 2005 11:07PM

Check out www.allelectronics.com Bought a couple of different rpm motors there for under $4 and they have lasted over 2 years. Hard to beat and they have just about any shaft size etc. you could want.

Options: ReplyQuote
Re: Building a rod dryer
Posted by: Anonymous User (---.dioceseaj.org)
Date: February 01, 2005 08:22AM

David Banaka, HI!

I would appreciate plans for a dryer. I have a wrapper given to me by a very generous friend. e-mail me at btomas@dicoeseaj.org and I will send you my street address. Thanks, Bruce


Options: ReplyQuote
Re: Building a rod dryer
Posted by: Jon Jenkins (Elrod) (---.brns.cox-internet.com)
Date: February 01, 2005 11:19AM

Yes, I would like to recieve an email of the plans as well. Thanks.
Elrod

Options: ReplyQuote
Re: Building a rod dryer
Posted by: William Bartlett (---.proxy.aol.com)
Date: February 01, 2005 05:09PM

Count me in on the plans also!!!

Thanks,

Bill in WV

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster