SPONSORS
2024 ICRBE EXPO |
Building a rod dryer
Posted by:
Anonymous User
(---.dioceseaj.org)
Date: January 31, 2005 11:34AM
Forgive me, but I was searching the site for plans for building a rod dryer and haven't found any. Can someone direct to that place. Thanks Re: Building a rod dryer
Posted by:
David Banaka
(67.171.129.---)
Date: January 31, 2005 04:35PM
I do not know of a site but I have built several 5' wrapper dryers cobos out of wood for people here locally. E-mail me if you are interested in the palnse and I will send you a picture of the wrapper/dryer. I have also found an excellent place to purchase the drying motor for under $9.00
Tight lines David Banaka Re: Building a rod dryer
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: January 31, 2005 05:53PM
David,
Your email is hidden. I want to know you source for motors so I can build a second dryer. Thanks, Gerry Re: Building a rod dryer
Posted by:
Jon Jenkins (Elrod)
(---.244.183.188.Dial1.StLouis1.Level3.net)
Date: January 31, 2005 11:07PM
Check out www.allelectronics.com Bought a couple of different rpm motors there for under $4 and they have lasted over 2 years. Hard to beat and they have just about any shaft size etc. you could want. Re: Building a rod dryer
Posted by:
Anonymous User
(---.dioceseaj.org)
Date: February 01, 2005 08:22AM
David Banaka, HI!
I would appreciate plans for a dryer. I have a wrapper given to me by a very generous friend. e-mail me at btomas@dicoeseaj.org and I will send you my street address. Thanks, Bruce Re: Building a rod dryer
Posted by:
Jon Jenkins (Elrod)
(---.brns.cox-internet.com)
Date: February 01, 2005 11:19AM
Yes, I would like to recieve an email of the plans as well. Thanks.
Elrod Re: Building a rod dryer
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: February 01, 2005 05:09PM
Count me in on the plans also!!!
Thanks, Bill in WV Sorry, only registered users may post in this forum.
|