SPONSORS
2024 ICRBE EXPO |
library question
Posted by:
Anonymous User
(---.136.249.104.Dial1.Atlanta1.Level3.net)
Date: January 23, 2005 06:53PM
I checked into the library a few times, is this just a directory to tell you which magazine to look at, or can you pull them up on the site, I can't pull them up but don't have sense enough to know If I am doing something wrong. Re: library question
Posted by:
Ricky Wilson
(---.ipt.aol.com)
Date: January 23, 2005 06:56PM
The articles on right there. Just click on any blue link and they'll come up. Re: library question
Posted by:
Daren Howard
(---.sbc.com)
Date: January 23, 2005 07:35PM
There is a Rodmaker index, which tells you only what issue articles are in, and there there are the actual Library articles that are listed with the index. The index is just that but the articles that are with it are excellent. Re: library question
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: January 23, 2005 07:37PM
One of those Library Articles is an INDEX of the Articles in Back-Issues of RodMaker Magazine [RMM] (not the Library). Back-issues can be ordered by going to the RMM Link at left (~ $7 each, per entire Issue). Some of the Library Articles were originally published as Articles in RMM.
For me, the way to reduce the problem of ordering all the back issues I wished I had was to just start a subsciption now and hope for some revision articles to bring it all up to date. So far, so good. At ~ $27 per year (for 6 Issues), there is no better publication on rod-building. Few skilled crafts have such a valuable & high-quality magazine at such an affordable subscription rate. -Cliff Hall- Re: library question
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 23, 2005 09:30PM
I'm sure that I'll be coming back from Charlotte with several of the back issues in my luggage!
Putter Re: library question
Posted by:
Anonymous User
(---.int.bellsouth.net)
Date: January 25, 2005 06:55AM
thanks for the info. I have a subscription to the magazine, just wanted some info in an older issue Re: library question
Posted by:
Anonymous User
(Moderator)
Date: January 26, 2005 09:15AM
Jim,
You don't live that far from my office. If you're in the area, you can always stop by and look and find what you need here. Buddy Owens would also have a complete collection of issues. ........... Sorry, only registered users may post in this forum.
|