SPONSORS
2024 ICRBE EXPO |
problems with cp
Posted by:
john petrovsky
(---.proxy.aol.com)
Date: January 22, 2005 07:52PM
i used gudebrod color preserver on my butt wrap. i used a 80/20 mix with alcohol and most of the threads loosed . why? what did i do wrong ? Re: problems with cp
Posted by:
John Dow
(---.snet.net)
Date: January 22, 2005 08:20PM
If you used NCP thread it will happen , don't ask me why , but it happened to me also ........... that's why I don't use CP unless I really have to . I'm sure you will get a valid reason it did , but NCP is the only thread I've had it happen to when I mixed the 2 in a but wrap. Good Luck......... JD Got Fish ? Re: problems with cp
Posted by:
Anonymous User
(Moderator)
Date: January 22, 2005 08:37PM
Thread swells when you add CP or anything liquid. The mass of thread on a butt wrap causes it to be very noticeable. What you want to do is "tack" down the centers and corners wtih drops of CP, then after that drives go back and apply normally.
....... Re: problems with cp
Posted by:
Scott VanGuilder
(---.client.mchsi.com)
Date: January 24, 2005 08:03AM
That used to drive me nuts until I started doing what Tom suggested. Sorry, only registered users may post in this forum.
|