I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Hi, my name is Andrew and I am a Marble-holic.
Posted by: Andrew Petroski (---.sub-66-174-7.myvzw.com)
Date: January 21, 2005 05:02AM

Dang Putter has me hooked! I finally broke down and made my first test on marblizing last night. I made four attempts on the same scrap section and needless to say, two of them looked horrible. However, the other two turned out pretty cool for a first try so now I'm no doubt going to try some more.

I can't believe I waited so long to give this a shot. I think I have read just about every post on the board about it before trying and it helped.

When I manage to get something picture worthy I will be sure to post it.

Nothing is safe now!

Thanks Putter!

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Fred Yarmolowicz (---.brick101.nj.comcast.net)
Date: January 21, 2005 06:26AM

Hello Andrew,Hopefully Putter has a 12 step program to marbelizing.Its a shame the country is so big or we could meet a few times a week.

Freddwhy (Rapt-Ryte)

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Art Parramoure (---.252.145.247.Dial1.Chicago1.Level3.net)
Date: January 21, 2005 10:52AM

It will be o.k. Andrew..........
We all have been faced with the same situation.....
You know of course that there is NO KNOWN CURE????
The only advise I can give is try to see it thru......
Bear with it.... it will all be o.k.
(someday)(maybe)
After tons of testor paint has been used on countless fishing rods...............maybe?????

Art
mrparramoure@yahoo.com

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: January 21, 2005 07:56PM

Fishski - just don't Rod Bond your dog to the deck...



Edited 1 time(s). Last edit at 01/22/2005 12:47AM by Randy Parpart (Putter).

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Mike McGivney (---.jdover01.nj.comcast.net)
Date: January 22, 2005 09:54AM

I'm seeing marbelized lamp posts in your future..lol

Putter: That's how I taught my dogs to sit and stay

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: January 22, 2005 04:02PM

Good 'ole Rod Bond; SIT--- STAY no problems, now!! LOL

Options: ReplyQuote
Re: Hi, my name is Andrew and I am a Marble-holic.
Posted by: Andrew Petroski (---.sub-199-74-155.myvzw.com)
Date: January 24, 2005 09:44AM

Okay, it's getting worse .... My wife is questioning my ManHood because while driving around town this weekend I about came unglued everytime we passed a hobby shop, craft store, fabric store (for making rod socks), etc. Have you ever seen a grown man pout because his wife wouldn't let him go into a JoAnn's Fabric store? I should be shot.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster