SPONSORS
2024 ICRBE EXPO |
Renzetti Lathe?
Posted by:
Adrian Rodriguez
(---.111.231.98.ptr.us.xo.net)
Date: January 21, 2005 12:04AM
I know absolutely nothing about building. Is this a good one? Re: Renzetti Lathe?
Posted by:
Erik Kunz
(---.dsl.snfc21.pacbell.net)
Date: January 21, 2005 12:52AM
The best!!! Re: Renzetti Lathe?
Posted by:
Spencer Phipps
(---.client.comcast.net)
Date: January 21, 2005 02:17AM
It's a great rod wrapper, but it's not necessary unless you're going to build a lot of saltwater rods with lots of underwraps. Starting out simple with a hand wrapper is the best way to start I think.
Many of us have been building rods for many years by hand. Spend the money on the important stuff first, components and fit & finish are more important when you start out. You'll get better, faster I believe by doing things by hand. Welcome to the fold. Spencer Re: Renzetti Lathe?
Posted by:
Anonymous User
(Moderator)
Date: January 21, 2005 08:53AM
If you can afford it, and plan to be in this for the long haul, then the Renzette and the Custom Power Wrap are probably the two most capable units on the market today.
.......... Sorry, only registered users may post in this forum.
|