SPONSORS
2024 ICRBE EXPO |
measuring threads per mm
Posted by:
sanford hochman
(---.ne.client2.attbi.com)
Date: January 07, 2005 11:15AM
How many "A" threads are in one mm.? From what I have calculated its about 3 threads wide. Thanks
Re: measuring threads per mm
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 07, 2005 11:47AM
I just did a trim band in A metallics the other night; if I remember, I packed 9 threads into 2 mm ???
Putter Re: measuring threads per mm
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 07, 2005 01:27PM
I got home at lunch and measured two trim bands. One is 9 A Gudebrod metallic threads and it measures just under 2 mm. The other is 20 threads and measures right at 4 mm. These are packed threads...
Putter Re: measuring threads per mm
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: January 07, 2005 06:49PM
For me Gudebrod size A Nylon is 3.8, Madeira Polyneon is 4.1.
What are you using this calculation for? This is the most important calc for me when I'm designing and planning a wrap. Re: measuring threads per mm
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: January 07, 2005 08:35PM
For A thread weaves using Gudebrod black nylon as the turning thread, I divide the number of turns by 4.75 and it usual is accurate to within 1mm of the actual weave length. Sorry, only registered users may post in this forum.
|