SPONSORS
2024 ICRBE EXPO |
cp
Posted by:
chuck lagrange
(---.cp-tel.net)
Date: March 09, 2002 04:22PM
well, finally ready to begin wraps. will underwrap with gudebrod metalic and overwrap with ncp. will i need to use any cp on the underwrap? thanks chuck Re: cp
Posted by:
William Colby
(---.proxy.aol.com)
Date: March 09, 2002 10:19PM
Not to hold the color but you may find it easier to make the overwrap if you do use the CP. Re: cp
Posted by:
John Burford
(---.dsl.hstntx.swbell.net)
Date: March 09, 2002 10:39PM
you also will find cp seals the thread so air bubbles will not show up John T Burford aka Tightline Rod's Re: cp
Posted by:
Bill Doherty
(---.rdu.bellsouth.net)
Date: March 09, 2002 10:39PM
Chuck, William is right you don't need CP. But I use a different method. I do my my underwraps , seal with CP, then put a coat of epoxy on them. Then I wrap the guides on and CP them, then epoxy over everything. I use underwraps on saltwater rods only, so the extra weight doesn't hurt and it is alot easier to wrap over. The reason for doing it this way is not for easy wraping though, that's just a bonus. I want to make sure the thread is well sealed against saltwater. Bill Doherty Sorry, only registered users may post in this forum.
|