I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Tom what happened to the post???
Posted by: bill boettcher (---.an3.nyc41.da.uu.net)
Date: December 27, 2004 12:54PM

I was following a post on Making a fly blank a spin rod? What happened to it?? All of a sudden it disapeared? Not even removed just " gone " ??

Options: ReplyQuote
Re: Tom what happened to the post???
Posted by: Chuck McIntyre (---.228.69.47.Dial1.Denver1.Level3.net)
Date: December 27, 2004 01:40PM

Not to mention Jackie's response to this,that was right behind Bill's. I did not notice any wrongdoing on anyones part,however I may have overlooked something.

Options: ReplyQuote
Re: Tom what happened to the post???
Posted by: bill boettcher (---.an3.nyc41.da.uu.net)
Date: December 27, 2004 01:47PM

Maybe they are working on the software?
Try reposting

Options: ReplyQuote
Re: Tom what happened to the post???
Posted by: Anonymous User (Moderator)
Date: December 27, 2004 02:10PM

There is a rule listed at the top off the board, in each message window, and on the registration form, that requires the use of an actual first and last name and a valid email address in order to register or post messages. That's about the best I can do.

I don't mind providing this site for everyone but people will have to meet me halfway if they wish to post here. Disregarding or overlooking the rules on three seperate instances isn't something I can do much about. The users will have to at least take the simple pains of following the rules. I don't think that's asking too much.

..................

Options: ReplyQuote
Re: Tom what happened to the post???
Posted by: Jackie Pratt (---.townisp.com)
Date: December 27, 2004 02:22PM

Not a problem, but I can't seem to fix it in my registration. It's automatically trying to make all my postings be from jpratt instead of my real name. I'm going to keep posting without logging in. My message has been repeated if you would like to post any missing responses to it.

Thanks!

Options: ReplyQuote
Re: Tom what happened to the post???
Posted by: bill boettcher (---.an2.nyc41.da.uu.net)
Date: December 27, 2004 03:23PM

Sorry about that Tom. I would have told him but I did not notice

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster