SPONSORS
2024 ICRBE EXPO |
Which way do Pac Bay stripping guides face?
Posted by:
Tim Collins
(---.sanarb01.mi.comcast.net)
Date: December 22, 2004 01:44PM
I have Pac Pay double foot stripping guides and am not sure which way they are suppose to face when mounted on the blank. One side has a single foot that comes almost straight down from underneath the ring and then bends 90 degrees for the foot. The other side has two arms that comes off the sides of the ring and angles downward almost at a 45 degree angles to the double wide guide foot. Which side is suppose to go towards the butt end? Thanks. Re: Which way do Pac Bay stripping guides face?
Posted by:
Ted Morgan
(213.55.68.---)
Date: December 22, 2004 02:18PM
Single foot towards the tip. Re: Which way do Pac Bay stripping guides face?
Posted by:
Anonymous User
(12.145.80.---)
Date: December 22, 2004 02:20PM
Tim,
The double footed side goes toward the butt and the single goes toward the tip. That's the way I do them. Larry R. Tysinger Re: Which way do Pac Bay stripping guides face?
Posted by:
Anonymous User
(Moderator)
Date: December 22, 2004 03:20PM
Neither way is right nor wrong, although most people do them just like Ted and Larry. The line is concerned with where the ring is, not which way the feet face.
............ Re: Which way do Pac Bay stripping guides face?
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: December 22, 2004 06:03PM
But if you use single foot guides you never have to worry about that. Re: Which way do Pac Bay stripping guides face?
Posted by:
Anonymous User
(---.dialup.mindspring.com)
Date: December 23, 2004 11:38AM
Using Lowrider guides, the butt guide is reversed. How would you determine what is 'reverse' using the above two methods? Just asking.
Have a Merry Christmas and a prosperous New Year from the Swamp. C2 Sorry, only registered users may post in this forum.
|