SPONSORS
2024 ICRBE EXPO |
spiral wraps
Posted by:
josh kantrowitz
(63.117.201.---)
Date: December 21, 2004 02:45PM
i was interested in building a standup rod with a spiral wrap...i have the rodmaker issue (sep/oct 03) which provided great info on the process....i was looking to see if there were any other resources or suggestions for getting started on this...i was looking to build a 50-80lb short stroker rod w/short curved uni-butt...any info would be appreciated.
thank you Re: spiral wraps
Posted by:
Jeff Schwartz
(---.hurlburt.af.mil)
Date: December 21, 2004 08:15PM
What length were you looking for overall? The curved butt will shorten the rod a little but it's alot easier using a short straight butt on a stand-up. You can get blanks in varying lengths and should be able to trim the butt section down some if desired. The short straight butt adds about 19" to the rod length. The curved butt not that much less.
Jeff Sorry, only registered users may post in this forum.
|