SPONSORS
2024 ICRBE EXPO |
spiral wrap telescoping blank
Posted by:
Dave Patterson
(4.72.2.---)
Date: December 17, 2004 06:35PM
Has anyone tried to spiral wrap a telescoping flipping stick? Re: spiral wrap telescoping blank
Posted by:
Spencer Phipps
(---.client.comcast.net)
Date: December 17, 2004 07:07PM
You bet, nothing is different except the stripping guide has to be positioned so that it doesn't strike the rod butt in the retracted position. Some also add a thread wrap inside at the point where the blank just is coming out of the butt, while retracted, to act as a bearing surface for the loose blank to ride against in the butt. They do rattle a bit in the rod box, or strapped down on the deck. Re: spiral wrap telescoping blank
Posted by:
Daren Howard
(---.wi.rr.com)
Date: December 17, 2004 10:21PM
I would add a set of alignment dots to help in aligning the rod for use as you will not be able to just sight down the guides as easily. Other than that no real difference. Sorry, only registered users may post in this forum.
|