I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Horrocks Ibbitson FG rod
Posted by: John Hepburn (144.137.21.---)
Date: December 16, 2004 04:13AM

I have been offered a Horrocks Ibbotson, 'Thunderbird Supreme', Scotchply 3MCoy Epoxy, Fibre Glass Fly Rod, #1458, 8'long and in mint condition.
I am curious as to whether this rod is regarded as collectable and also how well it was regarded, relevant to other similar rods of it's era. I would also like to know when it might have been built.

John Hepburn

Options: ReplyQuote
Re: Horrocks Ibbitson FG rod
Posted by: eric zamora (4.246.209.---)
Date: December 16, 2004 05:32AM

check out this web site...

[p205.ezboard.com]

good luck!

eric
fresno, ca.

Options: ReplyQuote
Re: Horrocks Ibbitson FG rod
Posted by: Fran Park (69.164.17.---)
Date: December 16, 2004 06:43AM

I can tell you that H-I built bamboo rods before fiberglass technology, so I would guess that this rod was built in the fifties at the latest. H-I operated in Utica. New York. Most H-I rods were built for mass consumption, and weren't high-end equipment. But you could do an internet search and get a lot more info than this.

Options: ReplyQuote
Re: Horrocks Ibbitson FG rod
Posted by: larry pirrone (12.72.24.---)
Date: December 16, 2004 12:28PM

the fact that it is a 3m scotchply blank means it is a better and lighter grade of glass than the earliest trevarno glass rods. i don't know if it is collectible but you may find it to be a nice fishable rod. phillipson used 3m scotchply glass in their later rods and they were very nice casting rods. you will find that if you visit the website previously mentioned that someone may know about this rod. as to value it all depends on how much someone wants it. in mint condition some glass rod enthusiast may be interested.

Options: ReplyQuote
Re: Horrocks Ibbitson FG rod
Posted by: John Hepburn (144.137.21.---)
Date: December 17, 2004 03:25AM

Thanks for the info, its a little more than I started with. I will make further enquiries on the suggested Website .

John Hepburn.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster