SPONSORS
2024 ICRBE EXPO |
Spinning Rod Reel Seats
Posted by:
Jim Buraczewski
(---.dsl.milwwi.ameritech.net)
Date: December 14, 2004 09:23AM
Hi All, I have a couple of 4 or 5 year old Team Diawa Ultralight spinning rods that have a unique reel seat/handle assembly. I am trying to find something similar for a couple of rods I am now building. What makes them different is that the fore-grip cork is affixed to the reel locking ring. This means that when the reel is attached and locked in place there is no extra treaded portion of the reel seat, it is covered by the fore-grip. I find this more comfortable with Ultra-Lights. The size I am looking for is similar to the St. Croix SG-10. Any ideas where I can find them, I have checked a dozen or more places with out luck. Thanks Jim Re: Spinning Rod Reel Seats
Posted by:
Tom Kirkman
(---.152.54.130.Dial1.Atlanta1.Level3.net)
Date: December 14, 2004 09:26AM
Sounds like the Fuji Quick-Lock type hoods or similar. ...... Re: Spinning Rod Reel Seats
Posted by:
Rolly Beenen
(---.cpe.net.cable.roger)
Date: December 14, 2004 12:16PM
Custoum Tackle has the Quick lock listed on their web site along with the cork for them. Re: Spinning Rod Reel Seats
Posted by:
Bill Falconer
(---.pix.hs.uab.edu)
Date: December 14, 2004 07:26PM
Jim- If it is like either one of these it is a Quik Lock. Both of these are size 18s that I believe I got from Custom Tackle. [www.fishingphotos.net] [www.fishingphotos.net] Email me directly if you have questions. I hope this helps. Good luck! Bill Re: Spinning Rod Reel Seats
Posted by:
Brent Schneider
(66.182.8.---)
Date: December 16, 2004 02:04PM
I have some of these old Team Diawas also. Janns sells something similar. Try this link. If ti dosnt work go to the Janns website and put the word "concealed" in the search box.
[www.jannsnetcraft.com] Brent Sorry, only registered users may post in this forum.
|