SPONSORS
2024 ICRBE EXPO |
Fighting Butt Question
Posted by:
Mark Brown
(---.dsl.nsw.optusnet.com.au)
Date: December 13, 2004 09:31AM
I am putting together a Dan Craft FT1007-4 fly rod blank. I was hoping to keep it as light as possible and use a detachable set of two and five inch fighting butts with it to have the option of trying out a little two-handed casting. I have a small Pac Bay channel lock seat (CL7RC-C) and was wondering if fighting butt plug inserts are available for this or am I going to have to turn down one made for a CL8 reel seat? Thanks! Mark in Perth Re: Fighting Butt Question
Posted by:
Christian Brink
(---.dsl.aracnet.com)
Date: December 13, 2004 05:12PM
I have looked for this before and not seen one for the 7. You'll most likely have to turn one down. Christian Re: Fighting Butt Question
Posted by:
Mark Brown
(---.dsl.nsw.optusnet.com.au)
Date: December 13, 2004 09:07PM
Thanks Christian, I feared that would be the case! Mark Sorry, only registered users may post in this forum.
|