I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

broken rod
Posted by: john raymond (---.90.234.113.Dial1.Detroit1.Level3.net)
Date: March 06, 2002 09:08PM

have a st. croix legend elite 5 , broken into at the choke guide. is it repairable. i remember a post a while back of some one repairing crushed rods etc. thanks for the help guys john r.

Options: ReplyQuote
Re: broken rod
Posted by: William Colby (---.proxy.aol.com)
Date: March 06, 2002 09:37PM

Ralph O'Quinn has written an article in Rodmaker about 2 years ago that showed how to fix such breaks good as new. You can do it yourself or have someone do it, although it doesn't seem like many have the skills to fix these breaks. I sure don't. I think St. Croix has a pretty good warranty and for something like $10 you can get a replacement. This might only be on fly rods though. I'm not sure.

There is a site at www.tackleworks.org that lists rod builders and repair people across the country. You can look and see if there is anyone in your area. Ralph does some repair work I guess and he is listed in the Washington portion of the directory.

Options: ReplyQuote
Re: broken rod
Posted by: Tim Shaffer (---.dejazzd.com)
Date: March 06, 2002 10:08PM

If you are interested in reapairing it yourself click on the Mud Hole Tackle at the left. when the site comes up go to rodbuilding 101 the article by Ralph O'Quinn on repairing broken rods is there. Good information!

Options: ReplyQuote
Re: broken rod
Posted by: bill mathis (208.33.106.---)
Date: March 06, 2002 10:25PM

i slammed the truck door on my cabelas fly rod and broke it in the middle of tip section. i used a fiberglass section on the inside and a fiberglass section on the outside and then wrapped it with thread and flexcoat. i fished it today and it cast just fine. hope this helps.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster